Technical and Production Information - Now Pop One and Now Pop Two
Connectivity
The image below shows the layout of the connectivity panel which contains the following I/O:
- 2 x Analogue inputs and outputs directly to / from the PA system. These could be used for a DJ set up and some additional powered speakers for instance
- 2 x Ethernet ports directly to the data centre and building LAN for internet access and to other zones
- 2 x Q-LAN ports (to connect the enhanced system rack)
- 4 x Send or Return tie lines to the Guest Patch rack
- 4 x OpticalCON Duo fibre tie lines back to the guest patch rack
- 4 x Ethernet (ETH A through D) back to the guest patch rack
And the following power
- 4 x 13a sockets
The mobile racks can be connected to the QLAN ports to add additional Analogue I/O if required. The additional tie lines and fibre connectivity will NOT work as the multi pin signal and fibre connectors have not been allowed for here.
LINK TO FLOORPLAN - NOW POP ONE - WITH DIMENSIONS - PDF
LINK TO FLOORPLAN - NOW POP ONE - WITH POWER & FACILITIES
LINK TO FLOORPLAN - NOW POP ONE - WITHOUT DIMENSIONS - PDF
LINK TO FLOORPLAN - NOW POP TWO - WITH DIMENSIONS - PDF
LINK TO FLOORPLAN - NOW POP TWO - WITH POWER & FACILITIES
